The camlock leverage tool

Open camlocks without beating up your hands.

The EC Cam Tool is a hand lever for camlock (cam-and-groove) hose couplings. Its forked stainless steel head fits over the cam arm, so you can free a stuck fitting or pull the arms down until the coupling is fully seated, without striking anything.

$159Free shipping anywhere in the US
Veteran-OwnedDesigned and built by a U.S. Coast Guard veteran
Made in USAPatent Pending
EC Cam Tools with forked stainless steel heads, stainless steel shafts, and engraved hardwood handles reading E.C Cam Tool, Pat Pending 64/160493, Made in USA
Stainless steel head · Hardwood handle · Engraved and made in the USA
  • Veteran-Owned
  • Made in USA
  • Patent Pending
  • Free US shipping

Why it matters

Stuck camlocks shouldn't cost anyone their hands.

Camlocks are meant to be worked by hand, but in daily service they rarely cooperate. Grit, corrosion, swollen gaskets, and over-tightening seize the arms, and the usual fix is the heel of a hand or whatever is lying nearby. That is where the bruises, cuts, and strain injuries come from, along with couplings that never get fully seated.

For operators

  • Less strain on hands and wrists. A steady pull on the handle replaces repeated palm strikes, the motion behind most camlock hand injuries.
  • Stuck arms open without a fight. Seized or over-tightened arms swing free with leverage instead of a hammer or a pry bar.
  • Fully seated the first time. Pull both arms all the way down and know the coupling is locked. No second tries and no guessing.

For fleets and facilities

  • Fewer hand injuries. Fewer strike injuries means lower workers' comp exposure, less lost time, and fewer people working through pain.
  • Less downtime at the hose. Hookups and disconnects move faster when crews aren't fighting stuck fittings.
  • A secure connection every time. A fully seated coupling greatly reduces the risk of a leak or a hose letting go under pressure.

Fuel and petroleum haulers, dairies, cement and dry bulk carriers, refineries, chemical plants, and wastewater crews all connect camlocks every day. See the industries →

A tool that protects the people on the hose is one of the easiest safety investments a business can make, and crews notice when it's made for them.

Request a fleet quote

How it works

Slide it on. Pull. Done.

The forked head fits over the cam arm, and the handle supplies the leverage. The same motion opens a coupling or locks it down.

Close-up of the EC Cam Tool's forked stainless steel head

Fit the fork

Slide the fork over the cam arm of a standard camlock coupling.

EC Cam Tool engaged on a camlock arm on a fuel truck manifold

Pull the handle

The handle multiplies your force, so the arm moves with a steady pull instead of a strike.

Row of camlock couplings on a truck manifold

Open it or lock it down

Release the coupling in seconds, or pull both arms fully down so it's seated and sealed.

Step images are 3D illustrations from the original design renders.

Industries

If it has a camlock, it's an EC Cam job.

Camlock fittings are on tankers, plant transfer lines, and job-site pumps across dozens of industries. The EC Cam Tool works on all of them.

Fuel delivery
Dairy & food
Cement & concrete
Drilling mud
Fire service
Fluid transfer
Dry bulk
See all industries
Three EC Cam Tools side by side, showing the full length of each tool from forked stainless steel head to engraved hardwood handle

Order online

The EC Cam Tool

$159Free shipping in the US

Coming soonBrass EC Cam Tool

  • Fits the cam arms of standard cam-and-groove (camlock) couplings
  • Forked stainless steel head and shaft, about 10 inches overall
  • Hardwood handle, engraved with the patent-pending number
  • Opens and closes: one tool in place of a camlock wrench or pry bar

E.C Cam Tool · Pat Pending 64/160493 · Made in USA

See full details and specs →

Who makes it

Built by a mechanic who's connected a lot of hoses.

EC stands for Ed and Curt. Ed Werry is a master diesel mechanic with decades in the trade and a U.S. Coast Guard veteran. After years of watching drivers strike camlock arms to get them open, he designed a tool that does the job with leverage instead.

Curt McDonald spent 36 years hauling fuel and beating camlocks open by hand. This is the tool he wished he'd had.

E C CAM TOOLS, LLC is a veteran-owned small business, and every tool is made in the USA.

Read our story

Equipping a fleet, plant, or crew?

Tell us how many tools you need and where they're going. We'll get back to you with a quote.

Request a quote

Questions

Straight answers.

Don't see yours? Contact us and a real person will get back to you.

See all questions

What does it work on?

Standard camlock (cam-and-groove) couplings: the female coupler with two arms that swing down to clamp the hose on. Not sure about yours? Send us the size and type and we'll tell you.

Aren't camlocks supposed to work without tools?

They're designed to be operated by hand, and when they're new and clean they usually are. In daily service, grit, corrosion, swollen gaskets, cold weather, and over-tightening make the arms stiff or seized. That's when people start striking them. The EC Cam Tool gives you leverage for those moments, so the coupling still opens and seats properly.

Is it the same as a camlock wrench?

It does the job people mean by a camlock wrench, cam lever tool, or camlock opener. The difference is the forked head: it fits over the arm, so one tool frees a stuck coupling and pulls the arms down to seat it.

Can I buy for my whole crew?

Yes. Fleets, plants, and crews can request a quote. Tell us how many you need and where they're going, and we'll reply with pricing.

Ready when you are

Stop pounding camlocks.

Order one online today, or request a quote to equip the whole crew.