Questions
Don't see your question? Contact us and a real person will get back to you.
A camlock, also called a cam-and-groove coupling, is a quick-connect hose fitting. A grooved male adapter slides into a female coupler, and two cam arms on the coupler swing down to clamp it in place and press it against a gasket. Camlocks are used wherever hoses are connected and disconnected often: tank trucks, plant transfer lines, farms, and job-site pumps.
They're designed to be operated by hand, and when they're new and clean they usually are. In daily service, grit, corrosion, swollen gaskets, cold weather, and over-tightening make the arms stiff or seized. That's when people start striking them with the heel of a hand or prying with whatever is nearby. The EC Cam Tool gives you leverage for those moments, so the coupling still opens and seats properly without anyone hitting it.
First, make sure the line is shut off, depressurized, and drained according to your site's procedures. Then fit the EC Cam Tool over the cam arm and pull the handle steadily. Leverage frees most stuck arms without hammering, which can bend the arms or damage the coupling. If an arm is cracked or bent, replace the coupling rather than forcing it.
It does the job people mean by a camlock wrench, cam lever tool, or camlock opener: it gives you leverage on the cam arms. The difference is the forked head. It fits over the arm, so the same tool frees a stuck coupling and pulls the arms down to seat it.
Standard camlock (cam-and-groove) couplings: the female coupler with two arms that swing down to clamp the hose on. Not sure about yours? Send us the size and type and we'll tell you.
Slide the forked head over the cam arm and pull the handle. The handle multiplies your force, so the arm moves with a steady pull instead of a strike.
Yes. Use it to pull both arms fully down so the coupling is seated and sealed before you start moving product.
A forked stainless steel head and shaft, with a hardwood handle. It's about 10 inches long. A brass version is coming soon.
Any operation that connects camlocks: fuel and petroleum transport, refineries and terminals, dairy and food processing, breweries, chemical plants, cement and dry bulk, agriculture, wastewater, construction dewatering, and fire service. See the industries page for details.
$159 per tool.
Shipping is free anywhere in the US. Orders ship by USPS. We don't ship outside the US yet.
Sales tax is calculated at checkout, based on the shipping address.
Yes. Fleets, plants, and crews can request a quote. Tell us how many you need and where they're going, and we'll reply with pricing.
E C CAM TOOLS, LLC, a veteran-owned small business. Every tool is made in the USA and marked with its patent-pending number.
No products in the cart.